QOMO IR - Manual (Page 3)

QOMO Hite Vision Interactive Whiteboard User Manual
© Copyright 2012 QOMO HiteVision, LLC. All Rights Reserved
2
Attention
 Do not expose this whiteboard to rain or moisture to reduce the risk
of fire or electric shock.
 Do not expose this whiteboard to fire, electric shock, or sunlight for
long periods of time.
 This device is heavy with a Net Weight over 15 kg (33 lbs). Use
expansion bolts to securely mount the device to the wall.
 When the projector and interactive whiteboard are used together, do
not stare directly at the light from the projector.
 This user manual is only applicable to IR interactive whiteboard
products.
 Only the matched pens from our company or human fingers can write
or operate on the interactive whiteboard.
 This product uses the IR annotation technology. Make sure the
product will not contact with any other hard objects to avoid
deformation
of the board’s surface.
 If the interactive whiteboard is connected with a wire, make sure the
connection between this device and the computer is secure. It is
recommended that the wires are hidden to avoid pulling and
dragging the cables.
 If the interactive whiteboard is connected with a wire, use the cables
in the accessory box. Other cables might not be compatible with
this product.
 If the interactive whiteboard is connected by radio frequency, the
distance between the receiver and interactive whiteboard must not
exceed 15m (49 ft.). Avoid any obstacles which may shield the
electromagnetic waves.
 Do not touch, cut, or scratch the panel and frame with sharp or hard
objects. Do not drill holes or nail in any place of the product since it
will damage the device.