Reliance Controls THP212 - Manual

Motion Detector Alarm with Remote Control
Model Number: THP212
Product Description
The product uses a passive infrared technology to detect motion or movement.
It has 2 settings - ARM and CHIME.
In the ARM mode it will sound a loud 100 dB alarm when the unit detects any motion. The remote control allows for
disarming the unit before entering a doorway that is being monitored. There is also a 5 second alarm delay.
The chime feature allows the THP212 to monitor entry to doorways with a loud chime each time the unit detects any
motion.
THP212 Alarm Features
• 100 dB alarm
• LED light
• Panic button on remote for emergency
• 4 x “AA” batteries required
• AC adapter jack for power outlet option
• Battery Low indicator
• Button cell batteries included for remote control
• Alarm option
• Chime option
IMPORTANT - Read and thoroughly understand the instructions and warranty prior
to using this alarm. Before using this alarm, it should be tested to ensure it
functions properly. Do not install the alarm where it will be exposed to direct
sunlight or rain. The unit should be installed away from heat sources such as
radiators, heating ducts and stoves. If the unit is giving any false alarms, it may be
located too close to a heat source.
Low Battery Indicator
The THP212 Alarm can only detect a low battery when the switch is set to ARM or CHIME. It will not provide a
low battery when switched to OFF. When a low battery is detected, the LED light will flash every 3 seconds
indicating it is time to replace the battery immediately. It’s also suggested the batteries are changed every 6
months.
Sensor Range