Rice Lake RL550-10 Digital Chair Scale Operating Instructions User Manual
Page 11
Digital Chair Scale Operation Manual - Scale Assembly
7
6. Connect the load cell cable and indicator cable making sure to position the load cell cable on the grooves
so that it doesn’t get damaged or pinched.
Figure 3-10. Connect Load Cell Cable and Indicator Cable
7. Use the Allen key (provided) to release both screws holding the arm rest frame (marked with circles below).
Figure 3-11. Loosen Screws Holding Arm Rest Frame
8. Rotate the arm rest until the arm rests are parallel to the seat base.
9. Tighten the screws to secure the arm rests in place.
Note
The arm rests can move up and down to allow easy patient access.
Figure 3-12. Arm Rest Assembly\
10. Place the seat on the seat base and secure it into place using the four (4) M6 x 16 Allen screws.
Secure seat to scale
using 4 screws
Figure 3-13. Secure Seat to the Scale Using Screws