Rice Lake 920i USB Programmable Indicator Controller - 6V DC-to-DC Power Supply - Manual (Page 4)

230 W. Coleman St. • Rice Lake, WI 54868 • USA
U.S. 800-472-6703 • Canada/Mexico 800-321-6703 • International 715-234-9171 • Europe +31 (0)26 472 1319
www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in m.ricelake.com
Rice Lake Weighing Systems is an ISO 9001 registered company.
© Rice Lake Weighing Systems Specifications subject to change without notice.
9. Once installing the power supply is complete, position the backplate over the enclosure and reinstall the
backplate screws. Use the torque pattern shown in Figure 7 to prevent distorting the backplate gasket.
Torque screws to 15 in-lb (1.7 N-m).
1
3
5
14
17
16 12
9
8
7
10
11
18
15
4
2
6
13
T o r q u e b a c k p l a t e s c r e w s
t o 1 5 i n - l b ( 1 . 7 N - m )
Figure 7. Backplate Torque
10. Torqued screws may become less tight as the gasket is compressed during torque pattern, therefore a
second torque is required using the same pattern and torque value.
Specifications
Input Voltage 9–36 VDC
Output Voltage +6V (CN2, pin1), –6V (CN2, pin 4)
Output Current Up to 2.08A
Rated Power 25W