Rice Lake CW-90/90X - 720i - 820i - iQUBE2 - LaserLT WLAN - Manual (Page 4)

RF cable is fragile.
Handle with care.
Important
4 WLAN Installation Instructions
The white RF cable with RP-SMA connector coming from the WLAN option card is very fragile; handle it
with care.
Figure 4 WLAN Card Installed on CPU Board (shown on CW-90)
9. Slide the antenna partway through the largest cord grip.
Washdown Environment
Non-Washdown Environment
Note
In washdown environments, we recommend the antenna joint not be exposed to the environment as the
product may become trapped in the joint. In non-washdown applications, the joint should be exposed and
positioned to follow the travel of the indicator’s tilt direction.
10. Tighten the cord grip.
Figure 5 Antenna Installed Through Cord Grip