Installation – Rice Lake 820i Programmable Indicator/Controller - Panel Mount Enclosure Installation Instructions User Manual
Page 2
Advertising
2
820i
Panel Mount Installation Instructions
Installation
Use the dimensions shown in Figure 1 on page 1 to lay out the panel cutout for the panel mount enclosure. See
Figure 2 on page 2 for enclosure dimensions.
Figure 2. Panel Mount Enclosure Dimensions
Once the cutout has been prepared, slide the enclosure into the cutout from the front of the panel. Slide the
clinching bracket around the enclosure from inside the panel. Secure the bracket to the enclosure using the six 1/4"
screws provided in the parts kit (PN 94435), then use the nine 1-1/2" screws (PN 82425) to secure the clinching
bracket to the panel door. See Figure 3.
Figure 3. Clinching Bracket Assembly
11.56"
7.95"
5.20"
9.16"
10.38"
BACK VIEW
Display
Advertising