Rice Lake 920i Dual Kiosk Truck In/Out - Manual (Page 5)

Introduction 1
1.0 Introduction
The 920i® Dual Kiosk Truck In/Out system (PN 156959) consists of a bidirectional single platform truck scale, an
inbound truck kiosk, and an outbound truck kiosk. The Transaction database stores a record of each weighment. This
database table may be uploaded and cleared using a PC software program called iNterchange (optional).
After a successful download the 920i needs to be power cycled.
2.0 Operation
• The Inbound and Outbound Kiosks communicate with one another. A widget will display –
“***Communication Failure***” or “Communication OK”. If communications are down a truck can still be
processed but only on the Outbound Kiosk.
• The Outbound Kiosk contains all the transaction records (Trans).
• The Outbound Kiosk contains all the Inbound records (Truck).
2.1 Processing a Truck Without a Loop
1. System displays Enter Scale on both the Inbound and Outbound kiosk while showing GREEN on the
traffic signal and Stop/Go Remotes.
2. Driver pulls the truck fully onto the scale and stops the truck next to a kiosk.
3. System will display
Enter Truck ID or Scan Tag once the scale weight exceeds the Threshold Weight and the
Drive On Delay has timed out. Both traffic signals will change to RED .
Both photo eye inputs must also be activated showing that the truck is clear of the photo eyes. This feature
may be DISABLED in the setup Menu. If blocked the prompt goes away and displays – “Photo Eye Blocked”.
4. Driver enters the ID with the numeric keypad or scans the HID RF tag.
5. System queries the Truck database table with the entered ID/or scanned RF Tag and performs one of the
following actions:
ID FOUND
• Captures the stable weight.
• Recalls the inbound stored weight and calculates the net weight.
• Prints an Outbound ticket on the kiosk that initiated the process.
• Adds a new record to the Trans database table.
When memory is full, the system automatically deletes the oldest 25% of data.
• Displays Outbound Complete – Exit Scale .
• Increments the Ticket Number.
• Deletes the inbound truck from the Truck database if Stored Tare is disabled. If enabled, system
updates the inbound truck tare with the Inbound stored weight.
• Reprint option is available until the truck exits the scale.
ID NOT FOUND
• Captures the stable weight
• Adds a new record to the Truck database table.
• Prints an Inbound Ticket on the kiosk that initiated the process.
• Displays Inbound Complete – Exit Scale .
• Reprint option is available until the truck exits the scale.
6. Both traffic signals on the scale are changed to GREEN until the weight drops below Threshold Weight.
Note
Note
Note
Note