3 ethernet settings (if applicable) – Rice Lake 920i Dual Kiosk Truck In/Out User Manual
Page 8
4
Dual Kiosk Truck In/Out Software Operation Manual
3.2.2
Weigh Ticket Out (Auxfmt 2) – Weigh Out on Outbound
The ticket will be transmitted out Port 7 to an EU-T482. The format can be modified through the 920i front panel
or using a PC application called i-Rev.
Figure 3-4. Weigh Out on Outbound Kiosk
3.3
Ethernet Settings (if applicable)
If a wireless card is being used, all of these parameters are needed, PLUS the SSID of the access point or
router being used for wireless communication. Any security settings would also need to be set.
The database editor portion of iRev can also be used to perform database maintenance.
UDS2100 00-20-4A-E6-4B-74
PC
IP
192.168.1.1
192.168.1.X
Subnet
255.255.255.0
255.255.255.0
Gateway
0.0.0.0
0.0.0.0
Local Port
10001
10002
Remote Host
X.X.X.X
0.0.0.0
Remote Port
0
0
Connect Mode
C1 (With Any Character)
C1 (With Any Character)
Flush Mode
Yes
No
Pack Ctrl
Disabled
Disabled
Dis Con
No (Hard Disconnect=Yes)
No (Hard Disconnect=Yes)
Send Char
Default
Default
Table 3-1. Ethernet Settings (Test Settings)
Ticket 1
Truck Id 21
Gross Weight 8600 lb
Tare Weight 5540 lb
Net Weight 3060 lb
Inbound 01:33PM 05/22/2012
Outbound 01:34PM 05/22/2012
Note