Rice Lake 920i Grain Program - Manual (Page 7)

Operation 3
2.2 Manual Tickets
1. Print a manual ticket by pressing the Manual Ticket softkey.
2. The indicator will prompt Enter Gross Weight . Enter the gross weight, then press the enter key.
3. The indicator will prompt Enter Tare Weight . Enter the tare weight, then press the enter key.
4. The indicator will prompt Enter Truck ID . Enter the Truck ID, then press the enter key.
5. The indicator will prompt Enter Grain No. Enter the grain number, then press the enter key.
6. The indicator will prompt Enter % Shrink . Enter the shrink percentage, then press the enter key.
7. The indicator will prompt Enter % Dockage . Enter the dockage percentage, then press the enter key.
8. The indicator will prompt Enter % FM . Enter the foreign material percentage, then press the enter key.
9. The indicator will prompt Is This a Contract?. Press Yes and follow the prompts for the contract ticket or No
to get the finished ticket.
10. The printed ticket will be similar to the automatic ticket but weights will have a “K” printed next to them
indicating the values were keyed.
Using a manual ticket does not remove truck ID’s from the truck database.
2.3 Supervisor Mode
The supervisor mode allows the operator to add and delete grains and contracts, print the totals for all the grains or
contracts, clear the totals for individual or all the grains or contracts.
To enter the supervisor mode press the Supervisor Mode softkey, the indicator will prompt the user Enter Password .
The operator will key in the password, when the correct password is keyed in then the supervisor keys will be
displayed. The default password is
2349171 .
2.4 Editing Grains
1. Press the Edit Grains softkey, the grain softkeys will be displayed.
2. To add a grain, press the Add Grain softkey.
3. The indicator will prompt Enter Grain No. Enter the grain number, then press the enter key.
4. The indicator will prompt Enter Grain Name . Enter the grain name, then press the enter key.
5. The indicator will prompt Enter Divisor . Enter the divisor, then press the enter key. The grain will then be
stored.
6. To remove a grain, press the Remove Grain softkey.
7. The indicator will prompt Enter Grain ID to Delete . Enter the grain ID followed by the enter key.
8. The grain will then be removed from the database.
9. To clear all the totals from the grain database, press the
Clear All Totals softkey.
10. The indicator will prompt Clear Grain Totals with Yes and No softkeys.
• Press the Yes softkey to confirm deleting all of the totals for the grains.
• Press No to return to the grain softkeys without deleting.
11. To print a grain report, press the Print All Totals softkey and the grain report will be printed.
An example grain report is shown below:
Figure 2-2. Sample Grain Report
Note
GRAIN REPORT
11:56AM 11/01/2002
****************************************
NO. NAME DIVISOR ACCUMULATION
1 BEANS 60 242.39
2 CORN 75 0.00
........................................
TOTAL ALL GRAINS 242.39