5 editing contracts, 6 changing the supervisor password, 7 changing time and date – Rice Lake 920i Grain Program User Manual
Page 8
4
Grain Program Software Operation Manual
12. To view an individual grain, press the
Add Grain
softkey.
13. The indicator will prompt
Enter Grain No
. Enter a known grain number, press the
enter
key.
14. The indicator will display the grain information.
• Press the
key to print an individual grain report.
• Press the
CLR
key to clear the total for that individual grain.
2.5
Editing Contracts
1. Press the
Edit Contracts
softkey, the contract softkeys will be displayed.
2. To add a contract, press the
Add Contract
softkey.
3. The indicator will prompt
Enter Contract Number
. Enter the contract number followed by the
enter
key.
4. The indicator will prompt
Enter Contract Req’d Amount
. Enter the amount of bushels required for the
contract. The contract will then be stored.
5. To remove a contract, press the
Remove Contract
softkey.
6. The indicator will prompt
Enter Contract # to Delete
. Enter the contract number, press the
enter
key.
7. The contract will then be removed from storage.
8. To clear all the totals from the contracts, press the
Clear All Totals
softkey.
9. The indicator will prompt
Clear Contract Totals
with the
Yes
and
No
softkeys.
• Press the
Yes
softkey to confirm deleting all the totals.
• Press the
No
softkey to retain the totals and return to the contract softkeys.
10. The
Print All Totals
softkey will print a contract report.
Figure 2-3. Sample Contract Report
11. To view an individual contract, press the
Add Contract
softkey.
12. The indicator will prompt
Enter Contract Number
. Enter a known contract number, press the
enter
key.
13. The indicator will display the contract information.
• Press the
key to print an individual contract report.
• Press the
CLR
key to set the individual total to 0.
2.6
Changing the Supervisor Password
1. Press the
Change Password
softkey.
2. The indicator will prompt
Enter New Password
, enter the new password then press the
enter
key.
3. The indicator will then prompt
Re-Enter To Verify
, re-enter the new password then press the
enter
key.
4. If the two passwords match, the new password will be stored, if not the operator will be prompted to start
over.
Remember the new password, there is no way to recover it.
2.7
Changing Time and Date
1. Press the
Time/Date
softkey; the indicator will prompt the current time and wait for the new time to be
entered in 24-hr. time.
2. Enter the time (HHMM), press the
enter
key, the indicator will then display the current date and wait for
the new date to be entered.
3. Enter the new date (MMDDYY), press the
enter
key, the new time and date will be set.
CONTRACT REPORT
12:36PM 11/01/2002
****************************************
NUMBER REQ'D DELIVERED REMAINING
5 8000 0.00 8000.00
1 4000 0.00 4000.00
........................................
TOTALS 12000 0.00 12000.00
Important