Rice Lake 920i Programmable HMI Indicator/Controller - Troubleshooting - Manual (Page 6)

6 920i/iQUBE Email Troubleshooting
Telnet
2. In iRev, enter the SMTP address and desired email address. This parameter is found under System
Parameters » Features » Contact Information tab . Only the SMTP address and email address are needed to get
the system to mail an alert. The rest of the information is the contact info. The alert format port must be
set to the port the Lantronix card is connected to.
iRev settings
• The SMTP server address must be set in the 920i. This value can be set in iRev or by using the
ALERT.SERV serial command. The SMTP server address cannot be set using the 920i menus. To
disable alert notification, set the SMTP server address to 0.0.0.0.
Set ConnectMode to (C4)
Set DisConnTime to (00:15)
Supplied by
IT Dept.