Rice Lake CLS-420 Cargo Lift Scale - Bluetooth Option - Manual (Page 2)

2 Bluetooth Option Installation Instructions
4. To install the Bluetooth option board, line up the two rows of pins with the sockets on the board
assembly - J1 designator on the option board with Pin 1 designator on the board assembly - and
carefully push the option board fully into the sockets on the board assembly. See Figure 2.
5. Run the 8” zip tie through the two holes in the board (PN 109266) and over the Bluetooth option board,
secure it snugly against the option board and trim the excess. See Figure 3.
Figure 2. Install Bluetooth Option Board
Figure 3. Secure Bluetooth Option Board