Error messages – Rice Lake MA160 Sartorius Moisture Analyzer User Manual
Page 66
66
Error Messages
Operating Instructions Moisture Analyzer MA160
Error Messages
Certain events cause a message to appear on the display:
1 . Some error messages are displayed for approx . 3 seconds
(e .g .,
CAL-Extern
: calibration canceled) .
2 . Some error messages are displayed until they are acknowledged
by pressing a key (e .g ., “Incorrect access code” in “Service access”) .
3 . Information messages are displayed until they are acknowledged
by pressing a key .
Deactivated Keys
To prevent operating errors, only relevant functions/keys are displayed depending
on the situation . This prevents most operating errors from occurring . The following
buttons are only available in specific circumstances:
A
Only if there is a measured value in the zero setting range before
external calibration/adjustment .
D
Only if there is a measured value larger or smaller than “zero .”
Error Messages during Operation
“Value is too small .”
When an entered value is too low for the parameter .
“Value is too large .”
When an entered value is too high for the parameter .
“Passwords do not match .” When a password does not match the previous entry .
“Wrong password”
When password protection is enabled and the password
was entered incorrectly .
Error 46
When the max . heating temperature has been briefly
exceeded .
Error 401 to 407
Faulty heating element . Contact the Sartorius
Service Center .