Rice Lake MSI6260cs Digital Crane Scale Setup Exit Guide - Manual (Page 3)

Page 2 of 4
4). Select (y) Store current data to ROM NOW!
5). Menu will indicate, Please Wait… momentarily and then revert to Main Menu.
6). Procedure is now complete. Disconnect comm. cable from scale.
***** Data Backup to ROM *****
(y) Store current data to ROM NOW!
(ESC) Exit
Calibration data in long term storage
will be over-written.
Only take this action if your scale is
currently calibrated and operating
normally.
Improper use of this action may result
in the need to fully re-calibrate your
system.
Press (y) to take this action.
Press (ESC) to exit without changes.
---------- MSI 9000 - CellScale ----------
- (c) 2006 Measurement Systems International -
----------------------------------------------
16:57:52 01/05/08
(1) Channels/Calibration
(2) Communications
(3) Display
(4) Feature Locks/Passwords
(5) Product IDs
(6) Set Points
(7) System
(8) About...
Enter choice :