Rice Lake MSI-8000HD Indicator/RF Remote Display - ScaleCore Electronic Tension Test Recorder(ScETTR) - Manual (Page 13)

Configuration 9
2.4 Tester
The tester field tracks the person who is responsible for conducting the current tension test and entering the
information. The person’s name can be typed in the field to be recorded with the current tension test.
Note
Future support will include multiple users with login credentials.
2.5 Environment
Environmental conditions during the test can be recorded from the main display. Fields are provided for both
temperature and humidity. The values can be entered from the main display. This information will be recorded with
the current tension test.
2.6 Test Target Parameters
For greatest flexibility in testing a wide range of objects under tension, the ScETTR program provides six
customizable fields for recording information about the object being tested. Each field can be identified as needed,
as well as any value stored for that field. To edit the parameters, select
Edit>Test Target Parameters from the main
menu. The following dialog will display.
Figure 2-4. Test Target Parameters Dialog
Enter labels for each of the six parameters as desired. Typical examples of information to record would be:
• Serial Number
• Model Number
• Batch Number
• Manufacturer ID
• Configuration ID
• Rated Capacity
When complete, press OK. The main display will be immediately updated with the new parameter labels.