Rice Lake MSI-9300HT Hi-Torque Port-A-Weigh Plus CellScale RF Safety - Manual (Page 9)

Handling Hoist Motion 5
3.2 During Loading Procedures
SIDE LOAD BACK LOAD TIP LOAD
INCORRECT INCORRECT INCORRECT
Do Not
Use interface hardware that is over-
sized. If it restricts single point loading
and self alignment, it may result in off-
axis loading.
Do Not
Push or pull a loaded scale.
Do Not
Side load, back load or tip load a crane scale hook.
Figure 3-2. Loading Procedure Precautions