Rice Lake Okidata 320-390-420 Turbo - Service Guide User Manual
Page 84
Advertising
Page: 42
Service Guide ML320/321Turbo
Chapter 3 Parts Replacement
3.3.18 Carriage Shaft
(1) Remove the printhead
(see 3.3.1
).
(2) Remove the upper cover
(see 3.3.4
).
(3) Remove the driver board
(see 3.3.12
).
Remove the FG plate (L) 2.
(4) Slide the carriage shaft 1 to the left side (in the direction of the arrow) to remove.
(5) To install, reverse the removal procedure.
Note on installation:
After installation, check and adjust the gap between platen and printhead (see 4-1).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Advertising