0 assembly instructions, Assembly instructions, Type ii type i – Rice Lake Pipe Lever Scale User Manual
Page 6
Advertising
2
Pipe Lever Scale Installation Manual
2.0
Assembly Instructions
Before installing the pipe lever scale, ensure the base on which the scale will be built is plumb and level. The base
must be a suitable, poured-concrete foundation, built according to standard construction practices. Full grouting is
recommended under the fulcrum stands.
Load Cell
Stand
Center Connection
Shackle
Nose Iron
Main Pipe Lever
Fulcrum Stand
Loop Side Plate
Inside Pivot
Bearing
Girder Chair
Trunnion Pin
Outside Pivot
Spool
Fulcrum Stand
Bearing
Loop Assembly
Inside Pivot
Bearing
Girder Chair
Trunnion Pin
Outside Pivot
Spool
Side Plates
Drive
Screws
Fulcrum
Stand
Main
Pipe
Lever
Nose Iron
Type II
Type I
Figure 2-1. Pipe Lever Assembly
Advertising