Rice Lake Secura - Quintix and Practum Series - Application Guide - Manual (Page 2)

The Touch Screen on Your Balance
1
2
3
4
5
6
13
12
11
10
9
8
7
1 Toolbar showing currently available buttons:
Zero, Tare, Print (data output), GLP Printout
2 Line for metrological specifications
3 Alert icon indicating calculated values
4 Current weight or value measured
5 Key for toggling between the weight unit and display accuracy
6 Key for running an application
7 Application toolbar: Settings for the selected application
8 Menu key: For toggling to the selection mode for applications
and functions
9 Secura models only: USP minimum sample weight, SQmin
10 Bar graph: Scaled display showing capacity usage (in percent)
11 Plus (or minus) sign of the weight
12 Key for toggling between various display modes of a weight
13 Field for displaying the operating status and warnings
Leveling
To ensure accurate measurement results, you need
to level the balance each time after you have moved it
to a different location.
Secura Balances
As soon as LEVEL
appears on the display,
you will need to level
the balance. Make sure
that the weighing pan
is unloaded before
you begin. Touch
LEVEL. Then follow the
prompts shown on the
interactive display. Touch the menu key
to enter the selection
mode for applications
and functions.
Selecting the Language
Each balance has been factory preset to English.
You can select your preferred language as follows:
Touch the open-end
wrench icon.
Select Language.
Touch the desired
language and confirm
selection by touching
the checkmark.
Quintix and
Practum Balances
Turn the two feet as
shown in the picture
until the air bubble
is centered within the
circle of the level
indicator.