Rice Lake Mobile Group Animal Scale - MAS-M - Particulate Filter - Manual (Page 3)

19. Screw clear filter outside cover onto entire assembly.
20. Place a small bead of super glue around the
outside of only one end of the black tubing that
came in the kit.
21. Push the glued side up into the bottom of the filter.
22. Guide the bottom portion of the tubing through
the exit hole in the bottom of the battery box.
23. Tighten the outer brass fitting using 9/16"
adjustable wrench.
24. Reattach the air line.
25. Snug up fitting and position the filter as close
to the outside wall of battery box as possible.
26. Put battery back inside compartment.
27. Cinch the battery into the box using the blue strap.
28. Hook up the positive lead (red).
29. Hook up the negative lead (black).
30. Put the outside lid on the battery box and latch.
31. Close air relief valve on outside of box.
3 Particulate Filter Installation Instructions