Rice Lake Scout Pro Series Portable, Ohaus - Instruction Manual - Manual (Page 25)

SCOUT PRO EN-21
Clear/Exit Totalize
Performing this next step will erase all totalized memory.
3
Y
Specific Gravity (on certain models)
Specific gravity is enabled only when SPEC.Gr is turned ON in the Mode submenu in
the .S.E.T.U.P. menu. The Specific Gravity mode allows calculating the specific
gravity of a sample. SPEC.GR mode must be turned ON before removing platform
and installing hook. Prepare the balance as shown. Remove the balance platform,
insert the hook and install the beaker stand.
Beaker is not supplied.
The sample is weighed in air
suspended from the hook and then
weighed in water. The formula is
dry wt - wet wt.
Specific Gravity Setups
dry wt
Top View Side View
1 (See note)
Place weight on hook
1
(With print on, air weight is printed)
Place weight in water
1
(With print on, wet weight is printed)
Specific Gravity Value
NOTE: “G” indicates a specific gravity value.
Specific Gravity has no unit of measure.
Beaker Stand