Rice Lake Star TSP-700 - User Manual - Manual (Page 6)

– 3 –
ENGLISH
2. Consumable Parts and AC Adapter
When consumable parts have run out, use those specified in the table below.
Make sure that the AC adapter specified in the table is used.
Use of consumable parts or AC adapter which are not specified in the table may
result in damage to the printer, fire or electric shock.
(1) Roll paper specification
Thermal paper
Thickness: 65~150
µ
m
Width: 79.5
±
0.5 mm or 82.5
±
0.5 mm
Outer roll diameter: ø100 mm or less
Take up paper roll width: 80 mm or 83 mm
Core outer/inner diameter
Paper thickness Core outer Core inner
65~75
µ
m ø18
±
1 mm ø12
±
1 mm
65~75
µ
m ø32
±
1 mm ø25.4 mm
75~150
µ
m ø32
±
1 mm ø25.4 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the roll paper or
its core.
Do not fold the tail end of the paper.
(2) Recommended paper
Mitsubishi Paper Mills Limited
P220AG (normal type paper), 65
µ
m (thickness)
HP220A (high image stability paper), 65
µ
m (thickness)
HP220AB-1 (high image stability paper), 75
µ
m (thickness)
P220AB (normal type paper, card ticket), 85
µ
m (thickness)
P220AC-1 (normal type paper, card ticket), 95
µ
m (thickness)
P220AC (normal type paper, card ticket), 105
µ
m (thickness)
P220AD (normal type paper, card ticket), 130
µ
m (thickness)
P220AE-1 (normal type paper, card ticket), 150
µ
m (thickness)
Oji Paper Co., Ltd.
PD150R (normal type paper), 75
µ
m (thickness)
PD160R (high image stability paper), 65/75
µ
m (thickness)
Nippon Paper Industries
TF50KS-E2C (normal type paper), 65
µ
m (thickness)
Depending on the type and thickness of the paper, it may be necessary to change
the settings for printing darkness. To change the darkness settings, use the
printing darkness settings command <ESC><RS> ‘d’ n. Refer to the separate
programmer’s manual for details.
+0.5
-1 +0.5
-1