Using weighvault – Rice Lake WeighVault for Counterpart User Manual
Page 5
5
After a short period of LAN inactivity, the host will
terminate the connection, so the converter will have to
reinitiate the connection anytime the
Counterpart
requests an ID, or transmits weighment data.
Using WeighVault
The
Counterpart
WeighVault system should now be
ready to use.
1. Start the WeighVault editor and add an ID to
the database.
2. On the
Counterpart
, attempt to recall that ID
by pressing the ID key, entering the ID
number, and pressing
Enter
.
3. The
Counterpart
will scroll a message stating
it is loading the ID.
4. If the connection to WeighVault is successful,
the message will change to Loading ID from
PC.
If the connection is not successful, it will
respond with No ID, or it will load that ID from
its local memory, if programmed. Try to
establish the connection again.
If the ID continues to fail to load, verify all
settings in the
Counterpart
, option card, and
host PC. Also verify a firewall in the system is
not blocking access to port 5466 of the host,
and that all wiring is correct.