Ring Communications DAD104m - Manual (Page 8)

NOVEMBER 2005 DAD104 DIGITAL ANNUNCIATOR DISPLAY
RING COMMUNICATIONS, INC. 8
SET SYSTEM TIME/DATE -
The Time and Date menu is accessed with the following key sequence:
PARK - REMOTE CONTROL - PARK - REMOTE CONTROL
Use the SCROLL keys to move through the menu.
Use the ANSWER keys to Increment or decrement Time, Date or other options.
Change: Time, Date, Clock ON/OFF and Language select (English, German, French).
The CANCEL key exits the menu. No keys pushed for 30 seconds also exits the menu.
SUPERVISION OF CONNECTION TO DXC/DXA -
When the DAD104 is powered up or reset it will send a log on message out on the RS485 Network
asking what master station it is associated with. The DXC/DXA will respond with the call number and
subscriber address of that master station. The DAD104 will then start to monitor the connection with
the DXC/DXA that sent the response. If the connection fails the DAD will display the following error
message:
Line 1 - nn:76543210
nn = the network number that the DAD is connected to.
The numbers are nodes present on this network.
Line 2 - Net:nn Node:m
nn = the network number of the DAD
m = the node number of the DAD
Line 3 - Address:aa
aa = the network address of the DAD (the 8 bit dip switch).
Line 4 - Not Active
Not active to answer calls.