Ring Communications DNA934P - Manual (Page 9)

February 2013 Telephone Dialer with Recorder DNA934P
Switches:
SW2 - Network Address.
RESET - Reset of Telephone interface.
SW3 - Options:
1. OFF
2. Exchange Interface for remote Conference Telephone Monitoring
3. Exchange Interface for remote Conference Handset
4. Interface at remote Conference Handset
5. # -key from Telephone Terminates Call
6. OFF
7. OFF
8. Telephone Line Supervision
Resetting Battery RAM:
When the system is first installed the DNA934P must be reset before any configuration is
done.
Procedure
1. Set all 8 DIP switches in SW2 to OFF
2. Push and release RESET switch
3. Wait for MASTER LED to start blinking (reset complete)
4. Set Network address
5. Push and release RESET switch
Page 9
Ring-Master