Sage Kinetix Control BBL605UK - Manual (Page 10)

9
oPeratIng yoUr neW aPPLIanCe
Before fIrSt USe
Before using your blender for the first
time, remove any packaging material and
promotional labels. Ensure the appliance
is switched off at the power outlet and the
power cord is unplugged. Wash the lid, inner
lid, blender jug (refer to Disassembling the
blender jug) in warm, soapy water with a
soft cloth. Rinse and dry thoroughly. Do
not place parts in the dishwasher (with the
exception of the blender jug).
The blender jug may be washed in the
dishwasher. Ensure the lid has been removed
from the blender jug before placing into the
dishwasher. The motor base can be wiped
with a damp cloth. Dry thoroughly.
note
The blending blades are extremely
sharp. Avoid any contact with fingers
and hands.
aSSemBLIng and attaCHIng
tHe BLender
1. Place the motor base on a flat, dry
surface such as a bench top. Ensure
that the motor base is switched off at
the power outlet and the power cord
is unplugged.
2. With the blender jug in the upright
position place it onto the motor base.
The handle of the blender can be
positioned to the left or right hand
side of the appliance.
3. Add food or liquid into the blender
jug ensuring not to exceed the
MAX mark. Place the blender lid
firmly into position on the top of the
blender jug. Insert the clear inner
lid into the blender lid and turn
clockwise to lock into position.
note
When adding oil or other liquids
during operation, remove the inner
lid and pour ingredients through
this hole. Do not remove lid during
operation.
note
The blender features a Sage™ by
Heston Blumenthal‰ Assist™ Lid. This
allows the lid to fit tightly onto the
blender jug, avoiding displacement
during operation. The ring pull design
allows the user to easily remove the
lid with a simple leverage action.
4. Plug power cord into a 230V power
outlet and switch on.
5. Press the POWER button on the
far left of the control panel to turn
the blender on. The POWER button
will illuminate and flash. The LCD
timer screen will illuminate with
‘00’ displayed.