Casablanca Fan Company Star C28GXXM User Manual

Page 10

Advertising
background image

10

Screw

6-32 X 1"

(2)

Screw

6-32 X

3

/

8

"

(2)

Wood

Screw

1" (2)

Drywall

Anchor

6-32 (2)

12v Battery

W-72

Control

W-72

Control Holder

VERSA•TOUCH2™ CONTROL INSTALLATION

CONTROL BRACKET INSTALLATION

Standard Light Switch
Step A. Remove the two screws holding the switch

cover plate. Do not remove the cover plate.
Step B. Orient the control bracket as shown and line

up the two inner mounting holes with those on the

switch.
Step C. Insert and tighten the screws using the

provided screwdriver.

INNER

MOUNTING

HOLES

CONTROL

BRACKET

STANDARD

TOGGLE

SWITCH

SWITCH

COVER

PLATE

Rocker Light Switch
Step A. Break off the two tabs by pushing outward.
Step B. Remove the two screws holding the switch

cover plate. Do not remove the cover plate.
Step C. Orient the control bracket as shown and line

up the two inner mounting holes with those on the

switch.
Step D. Insert and tighten the screws using the

provided screwdriver.

OUTER

MOUNTING

HOLES

CONTROL

BRACKET

ROCKER

LIGHT

SWITCH

SWITCH

COVER

PLATE

Wall Installation
Step A. Locate a 2x4

wall stud in a convenient

location.
Step B. Orient the control

bracket as shown over

the 2x4 stud.
Step C. Insert the 1" wood

screws in either the inner

or outer mounting holes

and tighten using the

provided screwdriver.

DECOR OVALHEAD SCREW

6-32 X 1"

ANCHOR

PANHEAD

SCREW

DRYWALL ANCHOR

NOTE: The wall anchors and 6-32 x 1" screws may

be used in situations where mounting to a stud is

not possible. Use the inner mounting holes. After

securing the anchor, discard the anchor’s pointed

screws and use the 6-32 decor ovalhead screws

supplied.

WOOD

SCREW 1"

VERSA•TOUCH2™ HARDWARE (not to scale)

Step 12. Follow instructions for the type of transmitter control bracket you will be using.

SAFETY FIRST: To reduce the risk of electrical shock, this fan must be installed with an isolating wall control/

switch. CAUTION! Do not use with wall dimmer.

WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid state speed control

device. Use only the control provided with this fan.

Advertising