Casablanca Fan Company Star C28GXXM - Manual (Page 3)

3
S
tar ™
/ S
tarlet ™
INSTALLATION INSTRUCTIONS
Unpacking: Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and
check them against the parts listed here. Before discarding packaging material, be certain that all parts have been
removed.
FAN PREPARATION
Prepare for fan installation as follows:
Step A. Route the wires from the motor through the
Perma•Lock™ downrod and ball assembly.
MOTOR
COUPLING
TAPERED
THREAD
MOTOR
WIRES
GROUND
WIRE
Step B. Thread the downrod into the motor coupling and
turn it clockwise until it stops turning, ensuring that the
pole has bottomed out.
Step C. Securely tighten the locking bolt to ensure safe
operation of your fan.
Tip: The downrod has a tapered
thread that is designed to lock com-
pletely when correctly installed.
CAUTION: Failure to fully lock in the down-
rod before securely tightening the locking
bolt may cause the fan to separate from the
downrod during normal operation!
IMPORTANT SAFETY INFORMATION!
BEFORE STARTING THE INSTALLATION OF YOUR CEILING
FAN, INSTALL THE THREADED DOWNROD INTO THE MO-
TOR COUPLING AND LOCK THE ASSEMBLY
LOCKING
BOLT
DOWNROD
&
BALL
ASSEMBLY
LOCKING BOLT
(MOTOR COUPLING)
DOWNROD & BALL
ASSEMBLY
PERMA•LOCK™ HARDWARE
Setup: Remove the fan body from the box
and place the body of the fan on top of a cloth
on a flat surface. This will protect the fan body
from being scratched during assembly.
SETUP