SINGER CE-150 Futura - Manual (Page 36)

TURNING A SQUARE CORNER
1. To turn a square corner 5/8" (16 mm) from the fabric edge,
push the needle stop position selector switch to stop the
needle to its lowest position. Start and stop the machine
when reaching the cornering guide as shown. Raise the
presser foot and turn fabric.
2. New stitching line will align with 5/8” (16 mm) seam guide
on side of needle plate. Lower the presser foot and begin
stitching in new direction.
REVERSE STITCH
It is a good idea to begin or end seams with 3 to 5 stitches in
reverse to reinforce the seams in order to prevent unraveling.
As long as you are pushing the reverse stitch button, the
machine will continue to feed the fabric backwards.
Needle stop position
selector switch
Touche de position
d’arrêt d’aiguille
Interruptor de posicion
de aguja parada
Cornering guide
Guide d’angle
Guía de esquinas
Reverse stitch button
I n t er r u p t e ur c o u t ur e ar r iè r e
Interruptor de puntadas hacia atrás