L dehydrator assembly, Grounding instructions, Food safety – Cabela's Commercial Food Dehydrator 28-0301 User Manual

Page 5: Drying flowers

Advertising
background image

-5-

-16-

1. Make sure the

Dehydrator is turned off and unplugged.

2. Remove the

Racks and any other loose items from the interior and close

the

Door.

3. Gently lay the

Dehydrator onto its left side (when facing the Door) on a

rug, folded blanket or other similar article to prevent scratching.

DO NOT

lay the Dehydrator onto its right side because the glass Door may fall

open and break! DO NOT lay the Dehydrator onto its front or back to avoid

damaging the

Door, Control Panel and/or Circuit Breaker.

4. Insert the

Short Foot Bolts into the holes at the bottom of the Feet until

the

Bolts threads protrude out. Thread the Bolts & Feet into the Front Foot

Brackets.

5. Tighten the

Short Foot Bolts with a screwdriver.

6. Insert the

Long Foot Bolts into the holes at the bottom of the Feet until

the

Bolts threads protrude out. Thread the Bolts & Feet into the Rear

Bottom Corner Brackets.

7. Tighten the

Long Foot Bolts with a screwdriver.

8. While holding the

Door closed, carefully stand the Dehydrator upright

onto the

Feet.

80-L DEHYDRATOR ASSEMBLY

WARNING!

Before cleaning, assembling or disassembling the

Dehydrator, make sure the Dehydrator is OFF and the PLUG IS REMOVED

FROM THE OUTLET/POWER SOURCE!

This appliance must be grounded to protect the operator

from electric shock during use. For this purpose, it is

equipped with a three-conductor power cord and three-

prong grounding-type plug

(Figure A)

. The plug only fits

three-hole electric receptacles. For the plug to fit a

two-hole receptacle, you will need a Grounding Plug

Adapter with a wire or metal tab

(Figure B)

. Connect

the wire/tab to the electrical outlet with the cover plate

screw. The screw must be metal. The electrical box

must be properly grounded

(Figure C)

.

GROUNDING INSTRUCTIONS

Figure A

Figure C

Figure B

3-Hole

Electrical

Receptacle

Grounding

Type Plug

Grounding

Plug Adapter

Metal Tab

or Wire

3-Hole

Electrical

Receptacle

FOOD SAFETY

There are basic rules to follow when handling food.

They are COOK, SEPARATE, CLEAN, and CHILL.

COOK

It’s crucial to cook food to a safe internal temperature to destroy bacteria that is present.

The safety of hamburgers and other foods made with ground meat has been receiving a

lot of attention lately, and with good reason. When meat is ground, the bacteria present

on the surface is mixed throughout the ground mixture. If this ground meat is not cooked

to at least 160

o

F to 165

o

F (71

o

C to 74

o

C), bacteria will not be destroyed and there’s a

good chance you will get sick.

Solid pieces of meat like steaks and chops don’t have dangerous bacteria like E. coli on

the inside, so they can be served more rare. Still, any beef cut should be cooked to an

internal temperature of at least 145

o

F (63

o

C) (medium rare). The safe temperature for

poultry is 180

o

F (82

o

C) and solid cuts of pork should be cooked to 160

o

F (71

o

C). Eggs

should be thoroughly cooked too. If you are making a meringue or other recipe that uses

uncooked eggs, buy specially pasteurized eggs or use prepared meringue powder.

SEPARATE

Foods that will be eaten uncooked and foods that will be cooked before eating MUST

ALWAYS be separated. Cross-contamination occurs when raw meats or eggs come in

contact with foods that will be eaten uncooked. This is a major source of food poisoning.

Always double-wrap raw meats and place them on the lowest shelf in the refrigerator so

there is no way juices can drip onto fresh produce. Then use the raw meats within 1-2

days of purchase, or freeze for longer storage. Defrost frozen meats in the refrigerator,

not on the counter.

When grilling or cooking raw meats or fish, make sure to place the cooked meat on a

clean platter. Don’t use the same platter you used to carry the food out to the grill. Wash

the utensils used in grilling after the food is turned for the last time on the grill, as well as

spatulas and spoons used for stir-frying or turning meat as it cooks.

DRYING FLOWERS

• The flowers should be dry to start with, best if picked after the dew has dried and

before the night damp sets in. Dry the flowers as soon as possible after picking.

• The best condition for drying flowers is a dry, warm, dark, clean and well ventilated

area, which makes a dehydrator an ideal setting. Flowers will retain the best color

and condition when dried quickly.

• A low temperature should be used to retain the natural oils.

• Strip off the leaves or if you prefer to keep the foliage. Discard any brown or

damaged leaves.

• Place on the dehydrator

Rack in a single layer, avoiding overlapping.

• Drying times will vary considerably depending on the size of the flower and the

amount of foliage. Dry at 100°F (38°C).

Advertising
This manual is related to the following products: