Smart Power Systems SBP TBF UPS 1000-2000VA - Manual (Page 2)

1
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS This manual contains
important instructions for models SBP1000TBF -
SBP1400TBF and SBP2000-TBF that should be
followed during installation and maintenance of the
UPS and batteries.
Safety CAUTION!
• This UPS utilizes voltages that may be hazardous. Do not attempt to
disassemble the unit. The unit contains no user serviceable parts. Only
factory service personnel may perform repairs.
• Connection to any other type of receptacle other than a two-pole, three-wire
grounding receptacle may result in s shock hazard as well as violate local
electrical codes.
• In the event of an emergency, turn the power switch to the “off” position and
disconnect the power cord form the AC power supply to properly disable the
UPS
• Do not allow any liquids or any foreign object to enter the UPS. Do not
place beverages or any other liquid-containing vessels on or near the unit.
• This unit intended for installation in a controlled environment (temperature
controlled, indoor area free of conductive contaminants). Avoid installing the
UPS in locations where there is standing or running water, or excessive
humidity.
• Do not plug the UPS input into its own output.
• Do not attach a power strip or surge suppressor to the UPS.
• Do not attach non-computer-related items, such as medical equipment, life-
support equipment, microwave ovens, or vacuum cleaners to UPS
• To reduce the risk of overheating the UPS, do not cover the UPS' cooling
vents and avoid exposing the unit to direct sunlight or installing the unit near
heat emitting appliances such as space heaters or furnaces.
• CAUTION – To reduce the risk of fire, connect only to a circuit provided with
20 amperes maximum branch circuit overcurrent protection in accordance
with the National Electrical Code, ANSI/NFPA 70.
• The socket-outlet shall be installed near the equipment and shall be easily
accessible.