Smart Power Systems SBP TBF UPS 1000-2000VA - Manual (Page 8)

7
10. Battery Removal (SBP1000)
Chart 4
Chart 6
Chart 5
After removing battery cover (Chart 5), gently
extract the battery by pulling attached white vinyl
sheet (Chart 6). Disconnect the wires connected
to the battery. Be sure to replace the same type
of batteries and dispose of old batteries properly
at an appropriate recycling facility.
Before replacing the battery, turn off the UPS
and unplug the UPS cord from the wall outlet.
Follow Chart 4 to remove the screw located
on the bottom of the front panel and then open
the front cover.
Remove the front panel
Remove the battery cover