Unpacking, Assembly, Carton contents – Snow Joe SPX1000 Pressure Joe 1450 PSI 1.45 GPM 11.5-Amp Electric Pressure Washer User Manual

Page 7

Advertising
background image

Unpacking

Carton Contents

• Electric pressure washer
• Handle
• Trigger gun
• Adjustable spray wand assembly
• Two (2) Phillips head screws (for handle)
• Trigger gun holder
• Hose/cord holder
• Needle clean-out tool (included with manual packet)
• High-pressure hose
• Two (2) wheels
• Garden hose adaptor (female coupler) with two o-rings
• Manuals with registration card

1. Carefully remove the pressure washer and check to see

that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you find damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe

®

+ Sun Joe

®

customer service center at

1-866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new electric

pressure washer. The packaging is made of recyclable

materials. Properly dispose of these materials in

accordance with local regulations.

IMPORTANT! The equipment and packaging material are

not toys. Do not let children play with plastic bags, foils,

or small parts. These items can be swallowed and pose a

suffocation risk!

m

WARNING!

Do not connect to power supply until

assembly is complete. Failure to comply could result in

accidental starting and possible serious personal injury.

Assembly

Tools required: Phillips head screwdriver

1. Lay unit on its side. Firmly press the wheel onto the unit

body until it locks into place. Repeat on the opposite side

(Fig. 1).

2. Following the alignment grooves at the top of the machine

body, slide the handle into position from the front to the

back, so that the solid side of the handle faces the front

of the washer. Secure the handle using a Phillips head

screwdriver and the two (2) supplied Phillips head screws

(Fig. 2).

3. Slide the trigger gun holder into position (Fig. 3).

Fig. 1

Wheel

Fig. 2

Handle

Alignment

grooves

Fig. 3

Trigger gun holder

7

Advertising