Snow Joe SPX3000-RM Pressure Joe 2030 PSI 1.76 GPM 14.5-Amp Electric Pressure Washer - Manual (Page 5)

Unpacking
Carton Contents:
• Pressure washer unit
• Handle
• Manual
• Trigger gun
• Spray wand
• Quick connect 0º, 15º, 25º, 40º and soap nozzles
• Removable detergent tanks (2)
• 4 long screws
• 2 small screws
• Spray wand protector
• Trigger gun holder
• Hose holder
• Needle clean out tool
• High pressure hose
• Garden hose adaptor (female coupler) with two sealing rings
1. Carefully remove the contents from the shipping carton.
Make sure that all items listed in the carton contents are
included.
2. Inspect the product carefully to make sure no breakage
or damage occurred during shipping. If you find damaged
or missing parts, DO NOT return to the store. Please call
1-866-766-9563.
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new Electric Pressure
Washer.
Assembly
1. Position the washer as CLOSE as possible to the
water supply.
2. The washer must be used on a secure and stable surface
in a standing, upright position (Fig. 1).
3. Slide the trigger gun holder into position (Fig. 2).
4. Slide the handle into position and secure it with 4 long
screws (Fig. 3).
5. Insert the detergent bottles (top end first) under the ridge
of their designated storage compartment (Figs. 4 & 5).
Then snap the bottom of the bottles into the V-shaped
grooves to secure them in place (Fig. 6).
Fig. 1
Fig. 2
Fig. 3
Fig. 4
5