Cygnett i-x6 - Manual (Page 11)

8
Specifications
Type: Two-way Powered Speaker System
LF Driver: Woofer: 6.5" magnetically shielded paper cone
HF Driver: Tweeter: 1" magnetically shielded natural silk
Frequency Response: 45Hz-22KHz
Crossover Frequency: 3.0KHz
S/N Ratio: >95dB (typical, A-weighted)
Power: 100 watts
Dynamic Power: 20 watts RMS 4 per channel @0.5% THD+N
Input Impedance: 10K Ohms Unbalanced
Polarity: Positive signal at “+” input produces outward
low-frequency cone displacement
Input Sensitivity: 100 mV pink noise input produces 95dBA
output SPL at 1 meter with volume control at
maximum
Protection: RF interference, output current limiting, over
temperature, turn on/off transient, subsonic
filter
Indicator: Power on/off indicator on rear panel
Input Connectors: 2 RCA Inputs
Aux Inputs
Power Requirements: 100-120V/60Hz & 220-240V/50Hz AC Select
Dimension: 300mm(H) x 198.5mm(W) x 250mm(D)
Weight: 11.82kg
Finish: High Gloss Enamel
Colour: Black
?