Snow Joe SJ620-RM Ultra 18-Inch 13.5-Amp Electric Snow Thrower - Manual (Page 2)

2
3. Personal Safety
a. Stay alert – Watch what you are doing and use
common sense when operating the snow thrower.
Do not use the machine when tired, ill, or under the
influence of drugs, alcohol, or medication. A moment
of inattention may result in serious personal injury.
b. Wear proper clothing – Wearing rubber boots offers
additional protection from electric shock. Do not
wear loose clothing or jewelry that may become
caught in the machine. Wear protective headgear to
keep hair away from revolving parts of the machine.
Safety glasses offer better protection than everyday
eyeglasses.
c. Moving parts present risks – Keep your face,
hair, clothing, hands and feet away from moving
parts. All guards and safety attachments must be
installed properly before using the unit. Shut off and
disconnect cord before touching any parts other
than the handles and switch.
d. Surfaces – This snow thrower is intended for use
on paved surfaces. Do not use on gravel, stone, or
other unpaved surfaces unless the snow thrower
is adjusted for such surfaces according to the
instructions given in the operator’s manual.
e. Avoid accidental starting – Make sure the switch
is in the off position before plugging in the unit. Do
not carry the snow thrower with your finger on the
switch.
f. Body position – Maintain proper footing and
balance at all times. Place heels firmly on the ground
and tightly grasp the handle bar. Watch for uneven
surfaces and do not overreach. In case you fall or
collide with the snow thrower, inspect the unit for
any damages or cracks. When stepping backwards,
be careful to avoid obstacles beneath your feet or
behind you to avoid falling.
g. If the snow thrower strikes any object, first, stop
snow thrower immediately; then, inspect for
damage. Repair any damage before restarting and
operating the snow thrower.
4. Snow Thrower Use and Care
Know your snow thrower – Familiarize yourself with the
main parts of your snow thrower (Fig. 1).
Note: The only difference of SJ620 and SJ621 is halogen
light system.
P
O
C
D
E
G
F
H
I
J
K
M
A
B
N
Q
L
Figure 1-1 (Model SJ620)
A - Lower Frame J - Auger
B - Middle Frame K - Scraper Bar
C - Upper Frame L - Rubber Covered Plate
D - Joint Fixing T-Bolt and Knob M - Wheels (Back of the
E - Upper Chute Crank Machine)
F - Lower Chute Crank N - Safety Switch Button
G - Chute Deflector O - Polarized Cable Plug
H - Discharge Chute P - Handle Bar
I - Main Cover Q - ON/OFF Switch Lever
Figure 1-2 (Model SJ621 with Light)
Light
Light Switch