Symtech BCA 4 - Manual (Page 3)

1. GENERAL
1.1 INTRODUCTION
The Model “BCA 4 ISOCOLOR” Visual Headlamp Alignment System is an economical optical alignment
tool that functions under the same principle for accuracy and dependability of an aiming screen, with the
added benefit of Symtech Corporation’s “BCA 4
ISOColor” technology, without the excessive use of
valuable shop space and the confusion of vertical and horizontal lamp placement. System design and
operation has been engineered with the technician in mind. The “BCA 4”” features
ISOColor technology
that facilitates headlamp alignment, with profitability and customer satisfaction as the end result.
The Model “BCA 4
ISOColor” is designed, manufactured and serviced by Symtech Corporation, Lees
Summit, Missouri, the industry leader in headlamp alignment technology to the service and body repair
industries, the architect of the Model “LCA 2 EZ” Visual, “SCA 1
ISOColor” Visual, “CVA 3 EZ
ISOColor” Visual and the ”HBA 5” Electronic Headlamp Alignment systems along with the “AIM 200”
Headlamp Intensity meter.
We are confident that the “BCA 4
ISOColor” will provide you with years of exceptional service. Thank
you for selecting a Symtech “Safety by Design” product to address your headlamp alignment needs.
1.2 SYSTEM COMPONENTS
3
1.3 LASER WARNING
AVOID LOOKING DIRECTLY INTO LASER
LIGHT – POSSIBLE EYE INJURY CAN
OCCUR.
MAST
GLIDE PLATE
SIGHTING UNIT
Small Parts Package
OPTICAL HEAD
BASE & WHEELS
Large Parts Package
2 5 /
16
” x 5 ½” Carriage Bolts
1 Floor Slope Handle
2 Wheels
1 Wheel w/Floor Slope
Eccentric
1 3” Rotational Bearing
D A N G E R
L A S E R R A D IA T IO N
A V O ID D IR E C T E Y E E X P O S U R E
P E A K P O W E R < 5 m W
W A V E L E N G T H 4 0 0 -7 0 0 n m
C L A S S IIIA L A S E R P R O D U C T
Exploded
View
Rotational
Mount
2 Large Nylon Washers
2
5 /
16
” Nylon Washers
2 ¼” x
1
/
8
” (WHITE)Nylon
Spacers
2 ¼” x 3 /
16
” (BLACK)Nylon
Spacers
2 5 /
16
” Self-Locking Nuts
4 1 /
4
” x 20 Machine Screws
4 ¼” x 20 Machine Screws
1
3
/
8
” Self Locking Nut
1 3 /
8
” Flat Washer
FLOOR SLOPE
AXEL
OPTIONAL
DUST COVER
P/N: 040160000
FLOOR SLOPE
LASER
1.4 WARNING, EXPOSURE TO DIRECT SUNLIGHT
DO NOT PLACE OR POSITION “BCA 4” SO THAT DIRECT SUNLIGHT ENTERS
FRONT LENS. DOING SO WILL CAUSE DAMAGE TO ISOColor SCREEN AND
VOID WARRANTY. Front lens acts like an enlarged magnifying glass which will
concentrate direct sunlight into a destructive high intensity beam on the aim screen.