Torbal BTA Series - Manual (Page 20)

- 19 -
5. Available sample size options will alternate on the display. Press the T key to select a size value
equal to the number of the sample placed in the container.
6. After the sample size has been selected, the scale will display the count of the sample. At any time
you can proceed with the count.
7. To turn parts counting off, select PCS from the main menu and press the T key when “PCSoFF” is
displayed.
11.2 Using a custom sample size
1. Place the counting container on the pan while in the weighing mode and press the T key to tare the
container.
2. Place a desired sample size in the container and press the MENU key. (i.e. 12 as illustrated)
pCS 5
17
-------
25.00
PCS
PCS