Torbal BTA Series - Manual (Page 22)

- 21 -
7. Once your custom sample size value has been entered and the MENU key pressed, the scale will
display the count of the sample. At any time you can proceed with the count.
8. Once an accurate count has been taken, the container and its contents may be removed from the
scale. To Turn parts counting off, select PCS from the main menu and press the T key when
PCSoFF is displayed.
11.3 Counting based on a known Individual Piece Weight (No Sample Size Required)
1. Place the counting container on the pan and press the T key to tare the container.
2. Press the MENU key to enter the main menu.
3. Wait for “PCS” to appear on the display and press the T key
4. Select “PCS on” by pressing the T key.
50
-------
pCS
pCS on
PCS