Torbal AGS100 250C PRO Quick Reference Guides - Manual

Making a Moisture Analysis
After configuring all of the necessary parameters and preparing the sample, you may begin your moisture
analysis by following the steps below. For information on parameter configuration see Chapters 7 and 8 of
the Instruction Manual.
Important Caution Note: Do not touch the top surfaces of the Moisture Analyzer’s Drying Chamber or
any internal parts either during or soon after use. As the parts and surfaces will be very HOT, allow
adequate time for the unit to cool. Be sure to read and follow all Caution Procedures listed in Chapter 1.
1. Open the Drying Chamber.
2. Using the Pan Handle, place the Disposable Pan on the Pan Support.
Note: Be sure the Pan Handle is not touching the Pan Shield.
3. Press the T key to Tare the Disposable Pan.