Torbal AGS100 250C PRO Quick Reference Guides User Manual
Page 2
4. Place the sample on the Disposable Pan. After the Tare has been performed, the Disposable Pan
can be removed from the Pan Support by using the Pan Handle to evenly distribute the sample.
Note: Make sure the sample is evenly distributed on the Disposable Pan as per the
instructions listed in Chapter 11.
5. Close the Drying Chamber.
6. Press the FI (START) key. The unit will indicate on the display that Heating is in progress. The
moisture content of the sample will be displayed as a percentage (%). During the analysis, in
addition to the result, the display will indicate the Drying Chamber Temperature, the present
weight of the sample, the elapsed time, and the initial weight of the sample.
Important Note: Before starting a new analysis press F5 (STOP), replace the disposable pan and perform
a TARE to make sure parameters m, t and m0 are cleared (set to 0).
For detailed instructions on this functions as well as additional features and modes please turn to chapter 11 of
the Instruction Manual. For technical questions or assistance please call: 1-866-473-6900