Transtherm Elegance Studio Fitted Cabinet - Manual (Page 24)

P 8
Confirmation button Temperature
display
Adjustement buttons
2 • Temperature settings
The temperature control(s) and setting(s) are adjusted from your wine
cabinet’s settings panel, as shown below:
Commissioning and Temperatures settings
On/Off button
Temperature display Confirmation button
Adjustment buttons
1 • Commissioning
- Once you have waited 48 hours, connect your cabinet to the
mains, having checked that there is power to the socket (check fuses and
their amperage, the state of the trip, and if necessary try out another
electrical appliance to verify the supply).
- Once connected to the mains, make sure that the Off/On switch, on
the right of your cabinet’s control panel, is set at "On" (I).
• Temperature display: Displays the current temperature inside your
wine cabinet.
• Adjustment button ( SET 1/ SET 2/probe): sets the desired tempe-
rature inside the cabinet.
• On/off button: switches the wine cabinet on and off.
Notice Elégance 5L.qxd 11/07/07 11:17 Page 24