Transtherm Elegance Studio Fitted Cabinet - Manual (Page 28)

P 12
Operating anomalies
When starting up
The compressor will not operate :
Ensure that there is power to the electrical supply plug by connecting
another electrical appliance to it.
The compressor will not turn off:
1- Place your hand on the condenser (metal grill located along the
exterior wall behind your cabinet). If the condenser is cold, get in touch
with your retailer.
2- If the condenser is hot, turn the cold adjuster to its highest level, if
the compressor does not stop, get in touch with your retailer.
Any intervention on the cold circuit should be performed by a refrige-
ration technician, who should carry out an inspection of the circuit
sealing system.
In the same way, any intervention on the electrical circuit should be
performed by an electrician.
The power cable is fitted with an earthed plug standard to the country
of consignment. It is essential that, for your safety, the electrical supply
to the cabinet be earthed. Please have the suitability of the socket
checked by a qualified electrician, who will make sure that it is properly
earthed and, if necessary, repair it.
ONLY A QUALIFIED ELECTRICIAN SHOULD MAKE ANY REPAIRS
OR INSPECTIONS TO YOUR ELECTRICAL SUPPLY.
THE USE OF GLASS DOORS HAS AN EFFECT ON PERFORMANCE.
important
Notice Elégance 5L.qxd 11/07/07 11:17 Page 28