Cavalry Storage CADA-U32A - Manual (Page 4)

Changing RAID Settings
1. Start your computer and wait for your operating system to load completely.
2. Connect the square end of the USB 2.0 cable to your CADA-U32 disk array.
Connect the flat end of the USB 2.0 cable to your computer.
3. Connect the power cable to your CADA-U32 disk array. Connect the other end
of the power cable to an electrical outlet.
4. Turn on the drive.
5. You will need to uninitialize the drive before changing RAID settings. To do
this, follow the instructions for your Operating System. (Windows users, see
below; Mac OS X users, see page 7) If your operating system is not listed,
contact customer service for assistance.
Windows 2000/XP/NT/Vista
a. Go to the Start
Menu and click
on “Run”.
4