Cavalry Storage CADA-U32A User Manual
Page 6
d. Now to use DISKPART. Warning: Be careful not to select your system
drive as you could erase it and your current Windows system!
i.
Type “list disk” to show all of your physical drives. Identify which is
the external drive. Make sure you know which before continuing.
ii.
Now select it by typing “select disk #”, where # is the number of
the drive listed in the disk list.
iii.
You can check that you selected the drive properly by typing “list
disk” again. The table will appear again with an asterisk (*) next to
the selected disk.
iv.
Now type “clean” to completely un-allocate and un-initialize your
disk. Make sure you’ve selected the correct disk before typing
“clean”.
v.
The drive is cleaned now. You can type “exit” to exit DISKPART and
type “exit” again to exit the virtual DOS window, or just close the
window to get back to your Windows desktop. Continue to Step 6
(p.12).
i.
ii.
iv.
v.
6