Tycon Power TP-SCPOE-24xx-HP Series - Manual (Page 5)

User’s Manual TP-SCPOE-24XX(-HP) Series
Electrical specifications
1.0 INPUT
1.1 Input Source types:
A. Solar Panel
B. POE
1.2 Input Voltage:
A. Solar Panel: 30V~36V
B. POE: 36V~57V (94w Min. For Only Charge, 160w Min. For Full Load.)
2.0 OUTPUT
Model TP-SCPOE-2424 TP-SCPOE-2424-HP TP-SCPOE-2448-HP TP-SCPOE-2448D-HP
Output 1*
(at rear
terminal)
24V/1.5A
(as Bat. Volt.)*
24V/1.5A
(as Bat. Volt.)*
24V/1.5A
(as Bat. Volt.)*
24V/1.5A
(as Bat. Volt.)*
Output 2
(at upper
RJ45)
24V/1.0A
(as Bat. Volt.)*
24V/1.0A
(as Bat. Volt.)*
48V/0.625A
(regulated)
48V/0.35A
(regulated)
*maximum voltage clamped at 24.5V
3.0 Battery Charge Types:
A. Solar Panel: charge current depends on the wattage of the solar panel.
B. POE: fixed current, 2.6A max, (TP-SCPOE-2424 only 1.3A max)
4.0 Battery Types: 24V Lead Acid Battery
5.0 Protection:
5.1 Battery Polarity Reverse Protection:
If only battery connected to terminal, when the battery polarities were reversed,
the model will stop output and REV indicator light on.
When the battery be removed and re-connected to terminal, the function will be
disable, if there is PoE power sources connected, when the battery polarities
reversed, the fuse will be burnt.
5.2 Battery Over Discharge Protection:
Cuts off the load when the battery voltage is lower than 20V + 0.3V, and auto
recover when the battery voltage returns to 24.3 V + 0.3V