Tycon Power TP-MS4x4 - Manual (Page 3)

User’s Manual TP-MS4x4 V5
TYCON POWER SYSTEMS
3
*LED Indicator
There are 4 LEDs on the front panel to indicate the input and output power status of each port.
LED STATUS Description
1~4 Green A valid power device is detected on this port.
Active current is 80mA.
Red No power device is detected on this port.
Off No input power apply, or input source alarm.
Alarm voltage is less than 58VDC, or larger than 10.5VDC.
Alarm current is 2A.
*Data Input
The upper ports 1-4 on the front panel are used for Gigabit Ethernet data input.
All four ports with surge protection.