Tycon Power TP-MS4x4 - Manual (Page 5)

User’s Manual TP-MS4x4 V5
TYCON POWER SYSTEMS
5
*PoE Output
The bottom ports 1-4 on the front panel are used for carry PoE output, the output voltage is the
same as input, no regulated. Normally as detailed below:
* Data pair A on line 1 and 2
* Data pair B on line 3 and 6
* Data pair C plus V+ on line 4 and 5
* Data pair D plus V- on line 7 and 8
*Output Polarity Reverse (for technician operation only)
The TP-MS4x4 may deliver PoE output with reverse polarity. Just move related jumpers from pin
1-2 to pin 2-3, and then
* Data pair C carry V- on line 4 and 5
* Data pair D carry V+ on line 7 and 8
Open the cover, the JP4~JP11 on the PCB responds for the output polarity of port 1~4, each two
jumpers should be paired moved to ensure the path enough for the through current.
JP10 & JP11 JP8 & JP9 JP6 & JP7 JP4 & JP5
Control port Port 1 Port 2 Port 3 Port 4
* Pin1-2(short pin1 & pin2): RJ45 pair C (pin4 & 5) carry PoE positive voltage.
* Pin2-3(short pin2 & pin3): RJ45 pair C (pin4 & 5) carry PoE negative voltage.