United Security AVD-2007 - Manual (Page 7)

7
Overview
Please study this section thoroughly before beginning to program the dialer, referring to the Sample Program
Planner on page 13. Then, select from among the options for each feature, listing each choice in pencil on the
blank Program Planner on page 14. Once the dialer is correctly programmed, list each choice in ink. One copy
of the Planner should be kept by the installer; one copy should remain with the end user.
A look At The Keypad
•
CALLOUT FOR NUMERALS:
Press these keys to enter telephone numbers and other programming information as
specified in this manual. A maximum of 50 digits can be input in each phone/pager
location.
•
CALLOUT FOR P:
Press this key to program in a pause. Each “P” provides a 2-second pause.
•
CALLOUT FOR R:
Press this key to record the combination of identification and directional outgoing
messages (OGMs). The total elapsed OGM time cannot exceed 60 seconds.
•
CALLOUT FOR M:
Press this key to change the Mode of the dialer, in sequence:
PROGRAM TEST OPERATE OFF.
Once the unit has been programmed, removing power or placing the dialer in the OFF mode will not affect the
programming.
P R O G R A M M I N G T H E D I A L E R