Universal Remote Control (URS) CAM-MC - Manual (Page 6)

I
NDOOR
N
ETWORK
C
AMERA
Page 3
Name Description
Reset Pressing the “F.D” button will return the unit
back to factory default settings, including the
Admin ID and password.
Bracket Connector Screw hole to mount the camera to bracket
LAN Connector Plug an Ethernet cable from the camera’s LAN
connection to a PoE router or switch like
URC's MFSPOE-8.
(If a PoE switch is not used, you must use a
PoE injector to supply power to the camera.)
Basic Installation
Follow these basic steps to install the Indoor Network Camera CAM-MC.
1. Fasten the camera to your planned location using the supplied
mounting bracket.
2. Plug an Ethernet cable to the LAN port of the camera.
Note: No separate power supply is needed as the camera
receives power via a PoE supply or a MFSPOE-8 router.